CENTRI I ODELJENJA
Novi materijali i nanotehnologije
Poluprovodnici i senzori
Robotika, mehatronika
Metalne konstrukcije u građevinarstvu

ENGLISH

 

Digitalni repozitorijum

 
Prof. dr Dragan P. Uskoković
Dr Dragan Uskokovic

email:dragan.uskokovic@itn.sanu.ac.rs

 

Bibliografija

 

Naučni radovi

262. M. D. Milović, D.D. Vasić Anićijević, D. Jugović, V. J. Anićijević, L. Veselinović, M. Mitrić, D. Uskoković, "On the presence of antisite defect in monoclinic Li2FeSiO4 – A combined X-Ray diffraction and DFT study", Solid State Sciences 87 (2018) 81–86, https://doi.org/10.1016/j.solidstatesciences.2018.11.008.

261. V. Uskoković, S. Marković, Lj. Veselinović, S. Škapin, N. Ignjatović, D.P. Uskoković, "Insights into the kinetics of thermally induced crystallization of amorphous calcium phosphate", Phys. Chem. Chem. Phys, 2018, https://doi.org/10.1039/C8CP06460A

260. N. L. Ignjatović, K. M. Penov-Gaši, J. J. Ajduković, V. V. Kojić, S. B. Marković, D. P. Uskoković, "The effect of the androstane lung cancer inhibitor content on the cell-selective toxicity of hydroxyapatite-chitosan-PLGA nanocomposites", Materials Science and Engineering C, 89 (2018) 371–377, https://doi.org/10.1016/j.msec.2018.04.028.

259. N. L. Ignjatović, K. M. Penov-Gaši, J. J. Ajduković, V. V. Kojić, S. B. Marković, D. P. Uskoković, "The effect of the androstane lung cancer inhibitor content on the cell-selective toxicity of hydroxyapatite-chitosan-PLGA nanocomposites", Materials Science and Engineering C, 89 (2018) 371–377, https://doi.org/10.1016/j.msec.2018.04.028.

258. S. Marković, A. Stanković, J. Dostanić, Lj. Veselinović, L. Mančić, S. D. Škapin, G. Dražič, I. Janković-Častvan, D. Uskoković, "Simultaneous enhancement of natural sunlight- and artificial UV-driven photocatalytic activity of a mechanically activated ZnO/SnO2 composite", RSC Advances, 7, 68 (2017) 42725-42737, https://doi.org/10.1039/C7RA06895F.

257. I. D. Shcherba, L. V. Kostyk, H. Noga, L. V. Bekenov, D. Uskokovich, B. M. Jatsyk, "X-ray spectra and electronic structure of the Ca3Ga2Ge3?12 compound", Solid State Sciences, vol. 71 (2017) 1–2, https://doi.org/10.1016/j.solidstatesciences.2017.06.014.

256. J. G. Najdanović, S. J. Najman, S. Stojanović, J. M. Živković, N. Ignjatović, D. Uskoković, M. Trajanović, "The Influence of Nanomaterial Calcium Phosphate/poly-(dl-lactide-co-glycolide) on Proliferation and Adherence of HeLa Cells", in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, 2017, pp. 387–400, https://doi.org/10.2991/978-94-6239-213-7_27.

255. S. Marković, D. Uskoković, "Tailoring and Processing of Defect Free Barium Titanate Stannate Functionally Graded Ceramics: BTS2.5/BTS5/BTS7/BTS10 FGMs", in: Proceedings of the IV Advanced Ceramics and Applications Conference. Atlantis Press, Paris, 2017, pp. 417–433 (https://doi.org/10.2991/978-94-6239-213-7_29)

254. N. Ignjatovic, S. Markovic, D. Jugovic, D. Uskokovic, " Molecular designing of nanoparticles and functional materials", Journal of the Serbian Chemical Society, 2017, https://doi.org/10.2298/JSC1612070011I.

253. Lj. Veselinovic, M. Mitric, M. Avdeev, S. Markovic, D. Uskokovic, "New insights into BaTi1-xSnxO3 (0 ? x ? 0.20) phase diagram from neutron diffraction data", Journal of Applied Crystallography, 49, 5 (2016) 1726-1733, https://doi.org/10.1107/S1600576716013157.

252. D. Jugović, M. Mitrić, M. Milović, N. Cvjetićanin, B. Jokić, A. Umićević, D. Uskoković, "The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder", Ceramics International, 43 (2017) 3224–3230, https://doi.org/10.1016/j.ceramint.2016.11.149.

251. N. L. Ignjatović,K. M. Penov-Gaši, V. Wu, J. J. Ajduković, V. V. Kojić, D. Vasiljević-Radović, M. Kuzmanović, V. Uskoković, D. P. Uskoković, "Selective anticancer activity of hydroxyapatite/chitosan-poly(d,l)-lactide-co-glycolide particles loaded with an androstane-based cancer inhibitor", Colloids and Surfaces B: Biointerfaces 148 (2016) 629–639, http://dx.doi.org/10.1016/j.colsurfb.2016.09.041.

250. I. D. Shcherba,L. V. Bekenov, V. N. Antonov, H. Noga, D. Uskokovic, O. Zhak, M. V. Kovalska, "Electronic structure and X-ray spectroscopic properties of YbNi2P2", Journal of Electron Spectroscopy and Related Phenomena, 212 (2016) 5-10, http://dx.doi.org/10.1016/j.elspec.2016.07.002.

249. Lj. Đorđević, S. Najman, P. Vasiljević, M. Miljković, N. Ignjatović, D. Uskoković, M. Plavšić, "Scanning electron microscopy analysis of changes of hydroxiapatite/poly-l-lactide with different molecular weight of PLLA after intraperitoneal implantation", Acta Veterinaria Belgrade 66 (2016) 234–244, http://dx.doi.org/10.1515/acve-2016-0020.

248. Z. S. Stojanović, N. Ignjatović, V. Wu, V. Žunič, Lj. Veselinović, S. Škapin, M. Miljković, V. Uskoković, D. Uskoković,"Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies, Materials Science and Engineering: C 68 (2016) 746–757, http://dx.doi.org/10.1016/j.msec.2016.06.047.

247. S. Marković, V. Rajić, A. Stanković, Lj. Veselinović, J. Belošević-Čavor, K. Batalović, N. Abazović, S.D. Škapin, D. Uskoković, "Effect of PEO molecular weight on sunlight induced photocatalytic activity of ZnO/PEO composites", Solar Energy, 127 (2016) 124-135, http://dx.doi.org/10.1016/j.solener.2016.01.026.

246. Z. Ajduković, S. Mladenović-Antić, N. Ignjatović, Z. Stojanovic, B. Kocić, S. Najman, N. Petrović, D. Uskoković, In vitro evaluation of nanoscale hydroxyapatite-based bone reconstructive materials with antimicrobial properties,  Journal of Nanoscience and Nanotechnology 16 (2016) 1420-1428, http://dx.doi.org/10.1166/jnn.2015.10699.

245. N. Ignjatović, V. Wu, Z Ajduković, T. Mihajilov-Krstev, D. Uskoković, V. Uskoković, "Chitosan-PLGA polymer blends as coatings for hydroxyapatite nanoparticles and their effect on antimicrobial properties, osteoconductivity and regeneration of osseous tissues", Materials Science and Engineering: C, 60 (2016) 357–364, http://dx.doi.org/10.1016/j.msec.2015.11.061.

244. M. Milović, D. Jugović, M. Mitrić, R. Dominko, I. Stojković-Simatović, B. Jokić, D. Uskoković, "The use of methylcellulose for the synthesis of Li2FeSiO4/C composites", Cellulose, 23, 1 (2016) 239-246, http://dx.doi.org/10.1007/s10570-015-0806-9.

243. N. Ignjatovic, Z. Ajdukovic, J. Rajkovic, S. Najman, D. Mihailovic, D. Uskokovic, "Enhanced Osteogenesis of Nanosized Cobalt-substituted Hydroxyapatite", Journal of Bionic Engineering 12, 4 (2015) 604–612, http://dx.doi.org/10.1016/S1672-6529(14)60150-5.

242. S. Marković, A. Stanković, Z. Lopičić, S. Lazarević, M. Stojanović, D. Uskoković, "Application of raw peach shell particles for removal of methylene blue", Journal of Environmental Chemical Engineering, 3, 2 (2015) 716-724, http://dx.doi.org/10.1016/j.jece.2015.04.002.

241. M. Kuzmanović, D. Jugović, M. Mitrić, B. Jokić, N. Cvjetićanin, D. Uskoković, "The use of various dicarboxylic acids as a carbon source for the preparation of LiFePO4/C composite", Ceramics International, 41, 5 (2015) 6753-6758, http://dx.doi.org/10.1016/j.ceramint.2015.01.121.

240. M. J. Lukić, Č. Jovalekić, S. Marković, D. Uskoković, "Enhanced high-temperature electrical response of hydroxyapatite upon grain size refinement", Materials Research Bulletin, 61 (2014) 534-538, http://dx.doi.org/10.1016/j.materresbull.2014.10.072.

239. S. Marković, M. J. Lukić, S. D. Škapin, B. Stojanović, D. Uskoković, Designing, fabrication and characterization of nanostructured functionally graded HAp/BCP ceramics, Ceramics International,http://dx.doi.org/10.1016/j.ceramint.2014.10.079.

238. A. Đorđević, N. Ignjatović, M. Seke, D. Jović, D. Uskoković, Z. Rakočević, Synthesis and Characterization of Hydroxyapatite/Fullerenol Nanocomposites, Journal of Nanoscience and Nanotechnology, 15 (2) (2015) 1538-1542, http://dx.doi.org/10.1166/jnn.2015.8671.

237. N. Ignjatović, S. Vranješ Djurić, Ž. Mitić, D. Janković, D. Uskoković, "Investigating an organ-targeting platform based on hydroxyapatite nanoparticles using a novel in situ method of radioactive 125Iodine labeling", Materials Science and Engineering: C 43 (2014) 439 - 446 (http://dx.doi.org/10.1016/j.msec.2014.07.046).

236. N. L. Ignjatović, P. Ninkov, R. Sabetrasekh, S. P. Lyngstadaas, D. P. Uskoković, "In vitro evaluation of a multifunctional nano drug delivery system based on tigecycline-loaded calcium-phosphate/poly-DL-lactide-co-glycolide", Bio-Medical Materials and Engineering 24 (2014) 1647–1658 (http://dx.doi.org/10.3233/BME-140978)

235. Lj. Veselinović, M. Mitrić, L. Mančić, M. Vukomanović, B. Hadžić, S. Marković, D. Uskoković, "The effect of Sn for Ti substitution on the average and local crystal structure of BaTi1-xSnxO3 (0 ? x ? 0.20)", Journal of Applied Crystallography, 47, 3 (2014) 999-1007 (http://dx.doi.org/10.1107/S1600576714007584).

234. A. B. Nastasović, N. L. Ignjatović, D. P. Uskoković, D. D. Marković, B. M. Ekmeščić, D. D. Maksin, A. E. Onjia, "Determination of thermodynamic interactions of poly(l-lactide) and biphasic calcium phosphate/poly(l-lactide) composite by inverse gas chromatography at infinite dilution", Journal of Materials Science, 49 (14) (2014) 5076-5086,. http://dx.doi.org/10.1007/s10853-014-8214-3.

233. D. Jugović, M. Milović, V. N. Ivanovski, M. Avdeev, R. Dominko, B. Jokić, D. Uskoković, "Structural study of monoclinic Li2FeSiO4 by X-ray diffraction and Mössbauer spectroscopy", Journal of Power Sources 265 (2014) 75-80, http://dx.doi.org/10.1016/j.jpowsour.2014.04.121

232. N. Filipović, M. Stevanović, J. Nunić, S. Cundrič, M. Filipič, D. Uskoković, "Synthesis of poly(epsilon-caprolactone) nanospheres in the presence of the protective agent poly(glutamic acid) and their cytotoxicity, genotoxicity and ability to induce oxidative stress in HepG2 cells", Colloids and Surfaces B: Biointerfaces, 117 (2014) 414–424http://dx.doi.org/10.1016/j.colsurfb.2014.03.015.

231. M. J. Lukić, Lj. Veselinović, M. Stevanović, J. Nunić, G. Dražič, S. Marković, D. Uskoković, "Hydroxyapatite nanopowders prepared in the presence of zirconium ions", Materials Letters 122 (2014) 296–300, http://dx.doi.org/10.1016/j.matlet.2014.02.072.

230. J. Choi, S. Park, Z. Stojanović, H.S. Han, J. Lee, H. K. Seok, D. Uskoković, K. H. Lee, "Facile Solvothermal Preparation of Monodisperse Gold Nanoparticles and Their Engineered Assembly of Ferritin–Gold Nanoclusters", Langmuir 29 (2013) 15698–15703 (http://dx.doi.org/10.1021/la403888f).

229. M. M. Stevanović , V. Uskokovic , M. R. Filipovic , S. D. Skapin, Dragan Uskokovic, "Composite PLGA/AgNpPGA/AscH nanospheres with combined osteoinductive, antioxidative and antimicrobial activities", ACS Applied Materials and Interfaces 5, 18 (2013) 9034–9042, http://dx.doi.org/10.1021/am402237g.

228. M. Stevanović, I. Bračko, M. Milenković, N. Filipović, J. Nunić, M. Filipič, D. P. Uskoković, "Multifunctional PLGA particles containing poly(L-glutamic acid)-capped silver nanoparticles and ascorbic acid with simultaneous antioxidative and prolonged antimicrobial activity", 10, 1 (2014) 151–162, Acta Biomaterialia, http://dx.doi.org/10.1016/j.actbio.2013.08.030.

227. S. Marković, M. Lukić, Č. Jovalekić, S.D. Škapin, D. Suvorov, D. Uskoković, Sintering effects on microstructure and electrical properties of CaCu 3Ti4O12 ceramics, Ceramic Transactions, 240 (2013) DOI: 10.1002/9781118744109.ch37.

226. S. R. Vučen, G. Vuleta, A. M. Crean, A. C. Moore, N. Ignjatović, D. Uskoković, "Improved percutaneous delivery of ketoprofen using combined application of nanocarriers and silicon microneedles", Journal of Pharmacy and Pharmacology 65, 10 (2013) 1451-1462, DOI: 10.1111/jphp.12118

225. D. Jugović, M. Mitrić, M. Milović, B. Jokić, M. Vukomanović, D. Suvorov, D. Uskoković, "Properties of quenched LiFePO4/C powder obtained via cellulose matrix-assisted method", Powder Technology 246 (2013) 539-544, http://dx.doi.org/10.1016/j.powtec.2013.06.021

224. M. Milović, D. Jugović, N. Cvjetićanin, D. Uskoković, A.S. Milošević, Z.S., Popović, F.R. Vukajlović, Crystal structure analysis and first principle investigation of F doping in LiFePO4, Journal of Power Sources 241 (2013) 70–79, http://dx.doi.org/10.1016/j.jpowsour.2013.04.109.

223. Z. Stojanović, M. Otoničar, J. Lee, M.M. Stevanović, M.P. Hwang, K.H. Lee, J. Choi, D. Uskoković, The solvothermal synthesis of magnetic iron oxide nanocrystals and the preparation of hybrid poly(L-lactide)-polyethyleneimine magnetic particles", Colloids and Surfaces B: Biointerfaces, 109 (2013) 236–243, http://dx.doi.org/10.1016/j.colsurfb.2013.03.053.

222. V. Uskoković, C. Hoover, M. Vukomanović, D. P. Uskoković, T. A. Desai, Osteogenic and Antimicrobial Nanoparticulate Calcium Phosphate and Poly-(D, L-Lactide-co-Glycolide) Powders for the Treatment of Osteomyelitis, Materials Science and Engineering: C, 33, 6 (2013) 3362 - 3373,http://dx.doi.org/10.1016/j.msec.2013.04.023.

221. N. Ignjatović, V. Uskoković, Z. Ajduković, D. Uskoković, Multifunctional hydroxyapatite and poly(D,L-lactide-co-glycolide) nanoparticles for the local delivery of cholecalciferol, Materials Science and Engineering: C, 33 (2) (2013) 943-950,http://dx.doi.org/10.1016/j.msec.2012.11.026.

220. N. Ignjatović, Z. Ajduković, V. Savić, S. Najman, D. Mihailović, P. Vasiljević, Z. Stojanović, V. Uskoković, D. Uskoković, "Nanoparticles of cobalt-substituted hydroxyapatite in regeneration of mandibular osteoporotic bones", Journal of Materials Science: Materials in Medicine 24, 2 (2013) 343-354, DOI: 10.1007/s10856-012-4793-1.

219. A. Stanković, S. Dimitrijević, D. Uskoković, "Influence of size scale and morphology on antibacterial properties of ZnO powders hydrothemally synthesized using different surface stabilizing agents", Colloids and Surfaces B: Biointerfaces, 102 (2013)21-28, http://dx.doi.org/10.1016/j.colsurfb.2012.07.033

218. M.J. Lukić, S.D. Škapin, S. Marković, D. Uskoković, Processing Route to Fully Dense Nanostructured HAp Bioceramics: From Powder Synthesis to Sintering, Journal of the American Ceramic Society 95, 11 (2012) 3394–3402 , DOI: 10.1111/j.1551-2916.2012.05376.x.

217. N. Filipović, M. Stevanović, A. Radulović, V. Pavlović, D. Uskoković, Facile synthesis of poly(epsilon-caprolactone) micro and nanospheres using different types of polyelectrolytes as stabilizers under ambient and elevated temperature, Composites Part B: Engineering, 2012, 45, 1 (2013) 1471–1479, http://dx.doi.org/10.1016/j.compositesb.2012.07.008

216. M. Đ. Vukelic, Ž. J. Mitic, M. S. Miljkovic, J. M. Živkovic, N. L. Ignjatovic, D. P. Uskokovic, J. Ž. Živanov-Curlis, P. J. Vasiljevic, S. J. Najman, Apatite formation on nanomaterial calcium phosphate/poly-DL-lactide-co-glycolide in simulated body fluid, Journal of Applied Biomaterials & Functional Materials 10 (2012) 43–48 (http://dx.doi.org/10.5301/JABFM.2012.9274)

215. A. Stanković, Z. Stojanović, Lj. Veselinović, S. D. Škapin, I. Bračko, S. Marković, D. Uskoković, ZnOmicro and nanocrystals with enhanced visible light absorption, Materials Science and Engineering B 177, 13 (2012) 1038-1045, http://dx.doi.org/10.1016/j.mseb.2012.05.013.

214. M. M. Stevanović, S. D. Škapin, I. Bračko, M. Milenković, J. Petković, M. Filipič, D. P. Uskoković, Poly(lactide-co-glycolide)/silver nanoparticles: Synthesis, characterization, antimicrobial activity, cytotoxicity assessment and ROS-inducing potential, Polymer 53, 14 (2012) 2818-2828, http://dx.doi.org/10.1016/j.polymer.2012.04.057

213. N. V. Kamanina, S. V. Serov, N. A. Shurpo, S. V. Likhomanova, D. N. Timonin, P. V. Kuzhakov, N. N. Rozhkova, I. V. Kityk, K. J. Plucinski and D. P. Uskokovic, "Polyimide-fullerene nanostructured materials for nonlinear optics and solar energy applications", Journal of Materials Science. Materials in Electronics 23, 8 (2012) 1538-1542, DOI: 10.1007/s10854-012-0625-9

212. D. Jugović, M. Mitrić, M. Kuzmanović, N. Cvjetićanin, S. Marković, S. Škapin, D. Uskoković, Rapid crystallization of LiFePO4 particles by facile emulsion-mediated solvothermal synthesis, Powder Technology 219 (2012) 128-134 (doi:10.1016/j.powtec.2011.12.028).

211. M.J. Lukić, Lj. Veselinović, Z. Stojanović, M. Maček-Kržmanc, I. Bračko, S.D. Škapin, S. Marković, S. D. Uskoković, Peculiarities in sintering behavior of Ca-deficient hydroxyapatite nanopowders, Materials Letters 68 (2012) 331-335, doi:10.1016/j.matlet.2011.10.085

210. M. Stevanović, I. Savanović, V. Uskoković, S. Škapin, I. Bračko, U. Jovanović, D. Uskoković, A new, simple, green, and one-pot four-component synthesis of bare and poly(alpha,gamma,L-glutamic acid)-capped silver nanoparticles, Colloid & Polymer Science 290 3 (2012) 221-231, DOI: 10.1007/s00396-011-2540-7.

209. M. Vukomanović, I. Šarčev, B. Petronijević, S.D. Škapin, N. Ignjatović, D. Uskoković, Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres. Part 4: A change of the surface properties during degradation process and the correspondingin vitrocellular response, Colloids and Surfaces B: Biointerfaces, 91 (2012) 144-153, doi:10.1016/j.colsurfb.2011.10.049

208. M. Stevanović, B. Kovačević, J. Petković, M. Filipič, D. Uskoković, Effect of poly-alpha, gamma, L-glutamic acid as a capping agent on morphology and oxidative stress-dependent toxicity of silver nanoparticles, International Journal of Nanomedicine 6 (2011) 2837-2847, http://dx.doi.org/10.2147/IJN.S24889

207. M. Stevanovic, V. Pavlovic, J. Petkovic, M. Filipic, D. Uskokovic, “ROS-inducing potential, influence of different porogens and in vitro degradation of poly (D,L-lactide-co-glycolide)-based material.” Express Polymer Letters 5 (2011) 996-1008. (http://dx.doi.org/10.3144/expresspolymlett.2011.97)

206. S. Marković, D. Uskoković, "Sintering of defect-free BaTi0.975Sn0.025O 3/BaTi0.85Sn0.15O3 functionally graded materials", Ceramic Transactions, vol. 226 (2011) 97-106.

205. M. Vukomanović, I. Bračko, I. Poljanšek, D. P. Uskoković , S. D. Skapin , D. Suvorov, The Growth of Silver Nanoparticles and their Combination with Hydroxyapatite to Form Composites via a Sonochemical Approach, Crystal Growth & Design, 2011, 11 (9) 3802–3812, DOI: 10.1021/cg2003436

204. N.V. Kamanina, N.A. Shurpo, S.V. Likhomanova, S.V. Serov, P.Ya. Vasilyev, V.G. Pogareva, V.I. Studenov and D.P. Uskokovic, Influence of the Nanostructures on the Surface and Bulk Physical Properties of Materials, Acta Physica Polonica A 120, 2 (2011) 256-259.

203. S. Marković, Lj. Veselinović, M. Lukić, Lj. Karanović, I. Bračko, N. Ignjatović, D. Uskoković, Synthetical bone-like and biological hydroxyapatites: a comparative study of crystal structure and morphology, Biomedical Materials 6 (2011) 045005. doi: 10.1088/1748-6041/6/4/045005.

202. M. Vukomanović, T. Zavašnik-Bergant, I. Bračko, V. Radmilović, S. Davor Škapin, N. Ignjatović, D. Uskoković, Poly(D,L-lactide-co-glycolide)/hydroxyapatite Core-shell Nanospheres. Part 3: Properties of hydroxyapatite nano-rods and investigation of a distribution of the drug within the composite, Colloids and Surfaces B: Biointerfaces 87 (2011) 226-235,doi:10.1016/j.colsurfb.2011.05.023.

201. A. Stanković, Lj. Veselinović, S. D. Škapin, S. Marković and D. Uskoković, Controlled mechanochemically assisted synthesis of ZnO nanopowders in the presence of oxalic acid, Journal of Materials Science, 46, 11 (2011) 3716-3724, DOI: 10.1007/s10853-011-5273-6.

200. D. Jugović, M. Mitrić, M. Kuzmanović, N. Cvjetićanin, S. Škapin, B. Cekić, V. Ivanovski and D. Uskoković, Preparation of LiFePO4/C composites by co-precipitation in molten stearic acid, Journal of Power Sources 196 (2011) 4613–4618doi:10.1016/j.jpowsour.2011.01.072

199. M. Vukomanović, S. D. Škapin, I. Poljanšek, E. Žagar, B. Kralj, N. Ignjatović, D. Uskoković, “Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres: Part 2: Simultaneous release of a drug and prodrug”, Colloids & Surfaces: B Biointerfaces 82, 2 (2011) 414-421. doi:10.1016/j.colsurfb.2010.09.012.

198. Marija Vukomanović, Srečo Davor Škapin, Boštjan Jančar, Tatjana Maksin, Nenad Ignjatović, Vuk Uskoković and Dragan Uskoković, “Poly(d,l-lactide-co-glycolide)/hydroxyapatite Core-shell Nanospheres: Part 1: A Multifunctional System for Controlled Drug Delivery”, Colloids & Surfaces: B Biointerfaces 82, 2 (2011) 404-413. doi:10.1016/j.colsurfb.2010.09.011.

197. M. Lukić, Z. Stojanović, S.D. Škapin, M. Maček-Kržmanc, M. Mitrić, S. Marković, D. Uskoković, "Dense fine-grained biphasic calcium phosphate (BCP) bioceramics designed by two-step sintering", Journal of the European Ceramic Society 31, 1-2 (2011) 19-27 doi:10.1016/j.jeurceramsoc.2010.09.006 

196. Vuk Uskoković & Dragan Uskoković, “Nanosized Hydroxyapatite and Other Calcium Phosphates: Chemistry of Formation and Application as Drug and Gene Delivery Agents”, Journal of Biomedical Materials Research: Part B – Applied Biomaterials 96B, 1 (2011) 152-191, DOI: 10.1002/jbm.b.31746

195. Jana Petković, Bojana Žegura, Magdalena Stevanović, Nataša Drnovšek, Dragan Uskoković, Saša Novak, Metka Filipič, “DNA damage and alterations in expression of DNA damage responsive genes induced by TiO2 nanoparticles in human hepatoma HepG2 cells”, Nanotoxicology 5, 3 (2011) 341–353, doi:10.3109/17435390.2010.507316

194. S. Marković, D. Uskoković, "Barium titanate stannate functionally graded materials: Choosing of the Ti/Sn concentration gradient and the influence of the gradient on electrical properties", Ceramic Transactions 221 (2010) 3-17.

193. N.V. Kamanina, P.Y. Vasilyev, S.V. Serov, V.P. Savinov, K.Y. Bogdanov, D.P. Uskokovic, Nanostructured materials for optoelectronic applications. Acta Physica Polonica A,117, 5, (2010) 786-790.

192. N.V. Kamanina, S.V. Serov, V.P. Savinov, and D.P. Uskoković, “Photorefractive and photoconductive features of the nanostructured materials", International Journal of Modern Physics B, 24, 6-7 (2010) 695-702 (DOI: 10.1142/S0217979210064319).  

191. N.L. Ignjatovic, Z.R. Ajdukovic, V.P. Savic, D.P. Uskokovic, Size effect of calcium phosphate coated with poly-DL-lactide- co-glycolide on healing processes in bone reconstruction, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 94B, 1, (2010) 108-117, doi:10.1002/jbm.b.31630.

190. Ljiljana Veselinović, Ljiljana Karanović, Zoran Stojanović, Ines Bračko, Smilja Marković, Nenad Ignjatović, Dragan Uskoković, “Crystal Structure of Cobalt-Substituted Calcium Hydroxyapatite Nano-Powders Prepared by Hydrothermal Processing”, J. Applied Crystallography, 43, 2 (2010) 320-327, doi:10.1107/S0021889809051395.

189. M. Vukomanović, M. Mitrić, S.D. Škapin, E. Žagar, J. Plavec, N. Ignjatović, D. Uskoković, Influence of ultrasonic processing on the macromolecular properties of poly (D,L-lactide -co-glycolide) alone and in its biocomposite with hydroxyapatite, Ultrasonics Sonochemistry, 17, 5, (2010) 902-908, doi:10.1016/j.ultsonch.2010.01.007.

188. Smilja Marković, Čedomir Jovalekić, Slavko Mentus and Dragan Uskoković, “Impedance spectroscopy of barium titanate stannate functionally graded materials”, J. European Ceramic society vol. 30, no. 6 (2010) 1427-1435, doi:10.1016/j.jeurceramsoc.2009.10.020.  

187. N.L. Ignjatović, P. Ninkov, R. Sabetrasekh, D.P. Uskoković, “A Novel Nano Drug Delivery System based on Tigecycline-Loaded Calciumphosphate Coated with Poly-Dl-Lactide-co-Glycolide“, Journal of Materials Science. Materials in Medicine, 2009, vol. 21, no 1 (2010) 231-239 (doi: 10.1007/s10856-009-3854-6).

186. P.J. Vasiljević, S.J. Najman, J.B. Dordević, V.P. Savić, M.D. Vukelić, J.Z. Živanov-Čurlis, N.L. Ignjatović & D.P. Uskoković, 2009, "Ektopična osteogeneza i hematopoeza iz implantiranih ćelija koštane srži na matrici od biokompozita hap/plla" (Ectopic osteogenesis and hematopoiesis after implantantion of bone marrow cells seeded on hap/plla scaffold), Hemijska Industrija, 63, 4 (2009) 301-307. (doi:10.2298/HEMIND0904301V).

185. D. Aleksendrić, I. Balać, C.Y. Tang, C.P. Tsui, P.S. Uskoković, D.P. Uskoković, “Surface Characterisation of PLLA Polymer in HAp/PLLA Biocomposite Material by Means of Nanoindentation and Artificial Neural Networks”, Advances in Applied Ceramics, 109, 2 (2009) 65-70, https://doi.org/10.1179/174367509X12502621261613.

184. I. Mitranić, M. Stevanović, B. Nedeljković, N. Ignjatović, D. Uskoković, "Controllable Synthesis of Horseradish Peroxidase Loaded Poly(D,L-lactide) Nanospheres", Journal of Bionanoscience, vol. 3, no. 1 (2009) 22–32.

183. Z. Stojanovic, Lj. Veselinovic, S. Markovic, N. Ignjatovic, D. Uskokovic, “Hydrothermal Synthesis of Nanosize Pure and Cobalt-exchanged Hydroxyapatite”, Materials and Manufacturing Processes, vol. 24, no. 10-11 (2009) 1096-1103, doi: 10.1080/10426910903032113.

182. S. Marković,  M. Miljković,  Č. Jovalekić,  S. Mentus, D. Uskoković, "Densification, Microstructure, and Electrical Properties of BaTiO3 (BT) Ceramics Prepared from Ultrasonically De-Agglomerated BT Powders", Materials and Manufacturing Processes, vol. 24, no. 10-11 (2009) 1114 – 1123, doi: 10.1080/10426910903031750.

181. M. Stevanović, D. Uskoković, "Influence of Different Degradation Medium on Release of Ascorbic Acid from Poly(D,L-lactide-co-glycolide) Nano- and Microspheres", Russian Journal of Physical Chemistry A, vol. 83, no. 9 (2009) 1457-1460.

180. M. Stevanović, T. Maksin, J. Petković, M. Filipič, D. Uskoković, "An innovative, quick and convenient labeling method for the investigation of pharmacological behavior and the metabolism of poly(DL-lactide-co-glycolide) nanospheres", Nanotechnology, vol. 20, no. 33, (2009) 335102 (12pp), doi: 10.1088/0957-4484/20/33/335102.

179. S. Markovic, D. Uskokovic, The master sintering curves for BaTi0.975Sn0.025O3/BaTi0.85Sn0.15O3 functionally graded materials, Journal of the European Ceramic Society, vol. 29, no. 11 (2009) 2309-2316, doi:10.1016/j.jeurceramsoc.2009.01.027.

178. D. Jugovic, D. Uskokovic, "A review of recent developments in the synthesis procedures of LiFePO4 powders", Journal of Power Sources, vol. 180, no. 2 (2009) 538-544,doi:10.1016/j.jpowsour.2009.01.074.

177. M. M. Stevanović, D. P. Uskoković, "Poly(lactide-co-glycolide)-based micro and nanoparticles for the controlled drug delivery of vitamins", Current Nanoscience, Vol. 5, No. 1 (2009) 1-14.

176. M. Jevtić, A. Radulović, N. Ignjatović, M. Mitrić, D. Uskoković, "Controlled assembly of poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres under ultrasonic irradiation", Acta Biomaterialia, vol. 5 (2009) 208-218, doi:10.1016/j.actbio.2008.07.026.

175. N.V. Kamanina, D.P. Uskokovic, “Refractive Indices of Organic Systems Doped with Nanoobjects”, Materials and Manufacturing Processes, Vol. 23, No. 6 (2008) 552-556 (doi:10.1080/10426910802157722).

174. M. Jevtić, M. Mitrić, S. Škapin, B. Jančar, N. Ignjatović, D. Uskoković, “Crystal structure of hydroxyapatite nano-rods synthesized by sonochemical homogenous precipitation", Crystal Growth and Design, 8, 7 (2008) 2217 - 2222, DOI: 10.1021/cg7007304

173. M. M. Stevanović, B. Jordović, D. P. Uskoković, “Morphological changes of poly(DI -lactide-co-glycolide) nano-particles containing ascorbic acid during in vitro degradation process”, Journal of Microscopy 232 (2008) 511-516, doi: 10.1111/j.1365-2818.2008.02150.x.

172. M. Stevanović, A. Radulović, B. Jordović, D. Uskoković, "Poly(DL-lactide-co-glycolide) Nanospheres for the Sustained Release of Folic Acid", Journal Biomedical Nanotechnology Vol. 4, No. 3 (2008) 349-358, doi:10.1166/jbn.2008.021.

171. D. Jugovic, M. Mitric, N. Cvjeticanin, B. Jancar, S. Mentus, D. Uskokovic, “Synthesis and characterization of LiFePO4/C composite obtained by sonochemical method”, Solid State Ionics 179 (2008) 415-419 (doi:10.1016/j.ssi.2008.03.014)

170. N. Ignjatović, D. Uskoković, “Biodegradable composites based on nano-crystalline calcium phosphate and bioresorbable polymers”, Advances in Applied Ceramics, Nanoceramics special issue, 107, 3 (2008) 142-147 (DOI: 10.1179/174367608X263421).

169. V. Kusigerski, D. Marković, V. Spasojević, N. Cvjetićanin, M. Mitrić, D. Jugović, D. Uskoković, "Ground-state magnetism of chromium-substituted LiMn2O4 spinel", Journal of Magnetism and Magnetic Materials 320:6 (2008) 943-949 (doi:10.1016/j.jmmm.2007.09.011

168. I. Jovanović, B. Jordović, M. Petković, N. Ignjatović, D. Uskoković, “Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters”, Microscopy Research and Technique 71:2 (2008) 86-92 (DOI: 10.1002/jemt.20529)

167. I.Lj. Validžić, V. Jokanović, D.P. Uskoković, J.M. Nedeljković, "Influence of solvent on the structural and morphological properties of AgI particles prepared using ultrasonic spray pyrolysis", Materials Chemistry and Physics, 107:1 (2008) 28-32, DOI:10.1016/j.matchemphys.2007.06.035.

166. S. Marković, M. Mitrić, G. Starčević, D. Uskoković, “Ultrasonics De-agglomeration of Barium Titanate Powder”, Ultrasonic Sonochemistry 15:1 (2008) 16-20 (DOI:10.1016/j.ultsonch.2007.07.008

165. M.M. Stevanovic, B. Jordovic, D.P. Uskokovic, “Preparation and characterization of poly(D,L-lactide-co-glycolide) microparticles containing ascorbic acid”, J. Biomedicine and Biotechnology, Volume 2007 (2007), Article ID 84965, 8 pages, DOI:10.1155/2007/84965

164. D. Uskoković, “Controlled Designing of Fine Particles at Molecular and Nano Levels”, International Symposium on Dielectric Materials: Design, Preparation and Applications, MS&T2007, Detroit, Michigan, USA, 2007, Conference Proceedings, Electronic and Magnetic Properties, CD Volume, pp. 109-120

163. R. Obradovic, Lj. Kesic, D. Mihailovic, N. Ignjatovic, D. Uskokovic, “Comparative Efficacy Analysis of Biomaterials and Soft Lasers in repair of Bone Defects”, J. Oral Laser Applications, 7, 3 (2007) 161-166

162. N. Ignjatovic, C. Liu, J. Czernuszka, D. Uskokovic, “Micro and nano/injectable composite biomaterials containing calcium phosphate coated with poly(dl-lactide-co-glycolide)”, Acta Biomaterialia 3: 6 (2007) 927-935 (DOI:10.1016/j.actbio.2007.04.001)

161. J.P. Marković, D. Jugović, M. Mitrić, D. Makovec, S.K. Milonjić, D.P. Uskoković, “Nanostructured ZrO2 Microspheres Synthesized by Ultrasonic Spray Pyrolysis”, Surf. Rev.& Lett., 14: 5 (2007) 915-919 (DOI: 10.1142/S0218625X07010524)

160. M. Stevanović, J. Savić, B. Jordović, D. Uskoković, "Fabrication, in vitro degradation and the release behaviours of poly(DL-lactide-co-glycolide) nanospheres containing ascorbic acid", Colloids and Surfaces B: Biointerfaces 59 (2007) 215-223, DOI:10.1016/j.colsurfb.2007.05.011 

159. M. Jevtić and D. Uskoković, “Influence of urea as a homogeneous precipitation agent on sonochemical hydroxyapatite synthesis”, Mat. Sci. Forum 555 (2007) 285-290

158. A. Čeliković, Lj. Kandić, M. Zdujić, D. Uskoković, “Synthesis of ZnO and ZrO2 powders by mechanochemical processing”, Mat. Sci. Forum 555 (2007) 279-284

157. R. Zivkovic, Lj. Kesic, D. Mihailovic, N. Ignjatovic, D. Uskokovic, "Investigation of HeNe Laser Therapy Influence on BCP/PLGA Osseointegration – Experimental Study", Facta Universitatis – Medicine and Biology 13:2 (2006) 109-113

156. M. Stevanovic, N. Ignjatovic, B. Jordovic, D. Uskokovic, “Stereological Analysis of the Poly-(DL-lactide-co-glycolide) Submicron Sphere Prepared by Solvent/Non-solvent Chemical Methods and Centrifugal Processing”, J. Mater. Sci., Mater. Med. 18:7 (2007) 1339-1344, (DOI:10.1007/s10856-007-0156-8).

155. D. Jugović, N. Cvjetićanin, V. Kusigerski, M. Mitrić, M. Miljković, D. Makovec and D. Uskokovic, “Structural and Magnetic Characterisation of LiMn1.825Cr0.175O4 Spinel Obtained by Ultrasonic Spray Pyrolysis”, Mat. Res. Bull., 42:3 (2007) 515-522 (DOI:10.1016/j.materresbull.2006.06.018)

154. E. Suljovrujic, N. Ignjatovic, D. Uskokovic, M. Mitric, M. Mitrovic, S. Tomic, “Radiation-induced Degradation of Hydroxyapatite/poly-L-lactide Composite Biomaterial”, Radiation Physics and Chemistry, 76: 4 (2007) 722-728 (DOI:10.1016/j.radphyschem.2006.02.013)

153. Z. Ajduković, N. Ignjatović, D. Petrovic, D. Uskoković, “Substitution of Osteoporotic Alveolar Bone by Biphasic Calciumphosphate/Poly-DL-Lactide-Co-Glycolide Biomaterials”, Journal of Biomaterials Application, 21: 3 (2007) 317-328 (DOI:10.1177/088532820707376)

152. N. Ignjatovic, P. Ninkov, Z. Ajdukovic, D. Uskokovic, “Biphasic Calcium Phosphate Coated with Poly-DL-Lactide-co-Glicolide Biomaterial as Bone Substitute”, J. Europ. Ceram. Soc. 27 (2007) 1589-1594 (DOI:10.1016/j.jeurceramsoc.2006.04.104)

151. P.S. Uskokovic, C.Y. Tang, C.P. Tsui, N. Ignjatovic, D. Uskokovic, “Micromechanical Properties of a Hydroxyapatite/poly-L-lactide Biocomposite using Nano-indentation and Modulus Maping”, J. Europ. Ceram. Soc. 27 (2007) 1559-1564 (DOI:10.1016/j.jeurceramsoc.2006.04.122)

150. I.Lj. Validzic, V. Jokanovic, D. Uskokovic, J. Nedeljkovic, “Formation of Silver Iodide Nano-particle from Thermodinamically Stable Self-assembled Dispersion using Spray Pyrolysis Method”, J. Europ. Ceram. Soc. 27 (2007) 927-929 (DOI:10.1016/j.jeurceramsoc.2006.04.13)

149. S. Marković, M. Mitrić, N. Cvjetićanin, D. Uskoković, “Preparation and Properties of BaTi1-xSnxO3 Powders and Multilayered Ceramics”, J. Europ. Ceram. Soc. 27 (2007) 505-509 (DOI:10.1016/j.jeurceramsoc.2006.04.066)

148. D.P. Uskoković, “Fine Particles in Advanced Technology”, International Symposium on Advanced Dielectric Materials and Electronic Devices, MS&T 2006 Conference Proceedings, Warrendale, PA, 2006, USA, Materials&Systems, Volume 1, 599-610

147. N. Ignjatovic, P. Ninkov, V. Kojic, M. Bokurov, V. Srdic, D. Krnojelac, S. Selakovic, D. Uskokovic, “Cytotoxicity and fibroblast properties during in vitro test of biphasic calcium phosphate/poly-dl-lactide-co-glycolide (BCP/DLPLG) biocomposites and different phosphate materials”, Microscopy Research and Technique 96:12 (2006) 976-982 (doi: 10.1002/jemt.20374)

146. I. Nikčević, D. Maravić, N. Ignjatović, M. Mitrić, D. Makovec, D. Uskoković, »The Formation and Characterization of Nanocrystalline Phases by Mechanical Milling of Biphasic Calcium Phosphate/Poly-L-lactide Biocomposite«, Mater.Trans. 47 (2006) 2980-2986

145. D. Uskokovic, V. Jokanovic, “Molecular Designing of Fine Particles Using Aerosol Synthesis”, Ceram. Trans. 174 (2006) 3-11

144. I. Balać, C.Y. Tang, C.P. Tsui, D.Z. Chen, P.S. Uskoković, N. Ignjatović, D.P. Uskoković, Nanoindentation of in situ polymers in hydroxyapatite/poly-l-lactide biocomposites”, Mat. Sci. Forum 518 (2006) 501-506

143. S. Marković, M. Mitrić, N. Cvjetićanin, D. Uskoković, “Structural and Dielectric Properties of BaTi1-xSnxO3 Ceramics”, Mat. Sci. Forum 518 (2006) 241-246

142. Z. Ajduković, S. Najman, Lj. Djordjević, V. Savić, D. Mihajlović, D. Petrović, N. Ignjatović, D. Uskoković, “Repair of Bone Tissue Affected by Osteoporosis with Hydroxyapatite/Poly-l-lactide (HAp/PLLA) with and without Blood Plasma”, Journal of Biomaterials Application 20 (2005) 179-190 (DOI: 10.1177/0885328205050519)

141. N. Ignjatovic, Z. Ajdukovic, D. Uskokovic, “New Biocomposite (biphasic calcium phosphate/poly-DL-lactide-co-glycolide/biostimulative agent) Filler for Reconstruction of Bone Tissue Changed by Osteoporosis”, J. Mater. Sci.: Mater. Med. 16 (2005) 621-626 (doi:10.1007/s10856-005-2532-6)

140. V. Jokanović, D. Uskoković, “Calcium Hydroxyapatite Thin Films on Titanium Substrates Prepared by Ultrasonic Spray Pyrolysis”, Mater. Trans. 46 (2005) 228-235

139. M. Radić , N. Ignjatović, Z. Nedić,M. Mitrić, D. Miličević,  D. Uskoković, “Synthesis and Characterization of Biphasic Calcium Phosphate/Poly-(DL-Lactide-Co-Glycolide) Biocomposite”, Mat. Sci. Forum 494 (2005) 537-542

138. N. Ignjatović, P. Ninkov, Z. Ajduković, V. Konstantinović, D. Uskoković, “Biphasic calcium phosphate/poly-(DL-lactide-co-glycolide) biocomposite as filler and blocks for reparation of bone tissue”, Mat. Sci. Forum 494 (2005) 519-524

137. V. Jokanović, A. Spasić, D. Uskoković, “Designing of Nanostructured Hollow TiO2 Spheres obtained by Ultrasonic Spray Process”, J. Colloid&Interface Sci. 278 (2004) 342-352 (doi:10.1016/j.jcis.2004.06.008).

136. J. Jovanovic, B. Adnadjevic, M. Kicanovic, D. Uskokovic, “The Influence of HAp Modification on the Cross-Linking of PDMS/HAp Composites”, Colloids and Surfaces B: Biointerfaces 39:4 (2004) 181-186 (doi:10.1016/j.colsurfb.2004.08.013).

135. N. Ignjatovic, D. Uskokovic, “Molecular spectroscopy analysis of the substitution of bone tissue by HAp/PLLA composite biomaterial”, Spectrosc-Int. J. 18 (2004) 553-565

134. N. Ignjatovic, D. Uskokovic, “Synthesis and Application of Hydroxyapatite/polylactide Composite Biomaterial”, Appl. Surf. Sci. 238 (2004) 314-319 (doi:10.1016/j.apsusc.2004.05.227).

133. N. Ignjatović, E. Suljovrujić, J. Budinski, I. Krakovsky, D. Uskoković, “Evaluation of Hot Pressed Hydroxyapatite/Poly-l-lactide Composite Biomaterial Characteristics”, J. Biomed. Mat. Res.Part B: (Applied Biomaterials) 71B (2004) 284-294 (doi: 10.1002/jbm.b.30093).

132. V. Jokanović, I. Nikčević, B. Dacić, D. Uskoković, “Synthesis of nanostructured carbonated calcium hydroxyapatite by ultrasonic spray pyrolysis”, J. Ceramic Processing Research 2 (2004) 157-162

131. C.Y. Tang, N. Ignjatović, D.P. Uskoković, P.S. Uskoković, K.C. Chan, S.C.L.Lo, T.C. Lee, “Processing and mechanical properties of biphasic calcium-phosphate/poly-L- lactide composite biomaterials”, Mat. Sci. Forum 471-472 (2004) 273-277

130. I. Nikčević, V. Jokanović, M. Mitrić, Z. Nedić, D. Makovec, D. Uskoković, “Mechanochemical Synthesis of Nanostructured Fluorapatite/Fluorhydroxyapatite and Carbonated Fluorapatite/ Fluorhydroxyapatite”, J. Solid State Chemistry 177(2004) 2565-2574 (doi:10.1016/j.jssc.2004.03.024).

129. I. Balać, M. Milovančević, C.Y. Tang, P.S. Uskoković, D. Uskoković, “Estimation of Elastic Properties of a Particulate Polymer Composite Using a Face-Centered Cubic FE Model”, Materials Letters 58 (2004) 2437-2441 (doi:10.1016/j.matlet.2004.02.033)

128. S. Marković, V. Pejović, M. Mitrić, N. Cvjetićanin, D. Makovec, D. Uskoković, “Screen printed BaTi1-xSnxO3 multilayer materials”, Mat. Sci. Forum 453-454 (2004) 459-464

127. D. Jugović, M. Mitrić, N. Cvjetićanin, M. Miljković, V. Jokanović, D. Uskoković, “Properties of LiMn2O4 powders obtained by ultrasonic spray pyrolysis”, Mat. Sci. Forum 453-454 (2004) 387-392

126. S. Najman, V. Savic, Lj. Djordjevic, N. Ignjatovic, D. Uskokovic, Biological evaluation of hydroxyapatite/poly-L-lactide (HAp/PLLA) composite biomaterials with poly-L-lactide of different molecular weights intraperitoneally implanted into mice”, Bio-Medical Materials and Engineering 14 (2004) 61-70

125. N. Ignjatovic, J. Jovanovic, E. Suljovrujić, D. Uskokovic “Injectable polydimethylsiloxane-hydroxyapatite composite cement”, Bio-Medical Materials and Engineering 13 (2003) 401-410

124. E. Suljovrujic, N. Ignjatovic, D. Uskokovic, “Gamma Irradiation Processing of Hydroxyapatite/Poly-L-lactide Composite Biomaterial”, Radiation Physics and Chemistry 67(2003) 375-379 (doi:10.1016/S0969-806X(03)00070-7).

123. Dj. Janackovic, I. Jankovic, R. Petrovic, Lj. Kostic-Gvozdenovic, S. Milonjic, D. Uskokovic, “Surface properties of HAP particles obtained by hydrothermal decomposition of urea and calcium-edta chelates”, Key Eng. Mater. 240-242 (2003) 437-440

122. J. Jovanovic, B. Adnadjevic, E. Suljovrujic, N. Ignjatovic, D. Uskokovic, “Influence of the HAp ratio on the thermodynamic and kinetic parameters of PDMS/HAp composites cross-linking”, Mat. Sci. Forum 413 (2003) 263-268

121. I. Balac, P.S. Uskokovic, M. Milovancevic, R. Aleksic, D. Uskokovic, “Finite element modeling of mechanical properties of particulate composite biomaterials”, Mat. Sci. Forum 413 (2003) 257-262

120. N. Ignjatovic, E. Suljovrujić, Z. Stojanović, D. Uskoković, “Structure and characteristics of the hot pressed hydroxyapatite/poly-L-lactide composite”, Sci. Sintering 34 (2002) 79-93

119. I. Balać, P.S.Uskoković, R.Aleksić, D.Uskoković, “Predictive Modeling of the Mechanical Properties of Particulate Hydroxyapatite Reinforced Polymer Composites”, Journal of Biomedical Materials Research (Applied Biomaterials) 63 (2002) 793-799 (doi: 10.1002/jbm.10407).

118. M.Dj. Blesic, Z.V. Saponjic, J.M. Nedeljkovic, D.P. Uskokovic “TiO2 Films Prepared by Ultrasonic Spray Pyrolysis of Nanosize Precursor”, Mat. Lett. 54 (2002) 298-302, doi:10.1016/S0167-577X(01)00581-X

117. P. Zivanovic, R. Curcic, V. Jokanovic, G. Djurkovic, D.P. Uskokovic, “Preparation of Ultrafine Tungsten Powder from Scheelite by Self-Propagating High-Temperature Synthesis”, Int. J. Self-Propagating High Temp. Synt. 10 (2001) 91-97

116. N. Ignjatovic, K. Delijic, M. Vukcevic, D. Uskokovic, ”The Designing of Properties of Hydroxyapatite/Poly-l-lactide Composite Biomaterials by Hot Pressing”, Z. Mettalkunde, 92 (2001) 145-149

115. I. Balac, P.S. Uskokovic, N. Ignjatovic, R. Aleksic, D. Uskokovic “Stress Analysis in Hydroxyapatite/Poly-L-lactide Composite Biomaterials”, Comp. Mater. Sci. 20 (2001) 244-252

114. N. Ignjatovic, V. Savic, S. Najman, M. Plavsic, D. Uskokovic, “Study of HAp/PLLA Composite as a Substitute for Bone Powder, using FT-IR Spectroscopy”, Biomaterials 22 (2001) 571-575, doi:10.1016/S0142-9612(00)00215-5.

113. Dj. Janackovic, I. Petrovic-Prelevic, Lj. Kostic-Gvozdenovic, R. Petrovic, V. Jokanovic, D. Uskokovic, “Influence of Synthesis Parameters on the Particle Sizes of Nanostructured Calcium Hydroxyapatite”, Bioceramics 13, Key Eng. Mater. 192-195 (2001) 203-206

112. N. Ignjatovic, K. Delijic, M. Vukcevic, D.P. Uskokovic, “Microstructure and Mechanical Properties of Hot Pressed Hydroxyapatite/Poly-L-lactide Biomaterials”, Bioceramics 13, Key Eng. Mater. 192-195 (2001) 737-740

111. N. Ignjatovic, Lj. Zivkovic, M. Plavsic, N. Petranovic, D. Uskokovic “Degradation Changes in PLLA during Hot Pressing HAp/PLLA Biocomposite”, 9th International Conference on Polymers in Medicine and Surgery, University of Krems, Austria, The Institute of Materials, Conference Pre-Prints (2000) 79-85

110. Z. Brankovic, O. Milosevic, D. Poleti, Lj. Karanovic, D.P. Uskokovic, “ZnO Varistors Prepared by Direct Mixing of the Constituent Phases”, Mat. Trans., JIM 41:9 (2000) 1226-1231

109. N. Ignjatovic, M. Plavsic, D. Uskokovic, “Hydroxyapatite/poly-L-lactide (Collagen) Biocomposite with Poly-L-lactide of Different Molecular Weights”, Adv. Eng. Mater. 2:8 (2000) 511-514

108. N. Ignjatovic, M. Plavsic, S. Najman, V. Savic, D. Uskokovic, “Analysis of In Vivo Substitution of Bone Tissue by HAp/PLLA Composite Biomaterial with PLLA of Different Molecular Weights using FTIR Spectroscopy”, Mat. Sci. Forum 352 (2000) 143-150.

107. N.L. Ignjatovic, M. Plavsic, M. Miljkovic, Lj. Zivkovic, D.P. Uskokovic, “Microstructural Characteristics of Ca-Hydroxyapatite/Poly-L-Lactide Based Composites”, J.Microsc. Oxford 196, Pt.2(1999) 243-248, DOI: 10.1046/j.1365-2818.1999.00623.x

106. P. Zivanovic, R. Curcic, Lj. Karanovic, D. Uskokovic, “Structural Evolution of TiO2-Al-Si in Self-Propagating High-Temperature Synthesis and Mechanical Alloying”, Int. J. Self- Propagating High Temp. Synt. 8 (1999) 69-80.

105. V. Jokanovic, Dj. Janackovic, P. Spasic, D. Uskokovic, “Modelling of Nanostructural Designing of Ultrafine Mullite Powder Particles obtained by Ultrasound Reactional Spraying”, Nanostructured Materials 12 (1999) 349-352

104. Dj. Janackovic, A. Orlovic, D. Skala, S. Drmanjic, Lj. Kostic-Gvozdenovic, V. Jokanovic, D. Uskokovic, “Synthesis of Nanostructured Mullite from Xerogel and Aerogel obtained by the Non-hydrolytic Sol-Gel Method”, Nanostructured Materials 12 (1999) 147-150

103. S. Stopic, I. Ilic, J. Nedeljkovic, Z. Rakocevic, D. Uskokovic, “Influence of Additives on the Properties of Spherical Ni Particles Prepared by Ultrasonic Spray Pyrolysis”, J.Mater. Res. 14, 7 (1999) 3059-3065

102. V. Jokanovic, Dj. Janackovic, D. Uskokovic, “Influence of Aerosol Droplet Formation Mechanism on Particle Size Distribution of Ultrafine Ceramic Powders”, Ultrasonic-Sonochemistry 6 (1999) 157-169

101. S.K. Milonjic, Lj.S. Cerovic, D.P. Uskokovic, “Sol-Gel Synthesis of Silicon Carbide and Silicon Nitride Powders and their Surface Properties”, in “MATERIALS SCIENCE OF CARBIDES, NITRIDES AND BORIDES”, Ed. Y.G. Gogotsi and R.A Andrievski, Kluwer academic publishers, The Netherlands, 1999. pp. 343-358

100. N. Ignjatovic, S. Tomic, M. Dakic, M. Miljkovic, M. Plavsic, D. Uskokovic, “Synthesis and Properties of Hydroxyapatite/Poly-L-Lactide Composite Biomaterials”, Biomaterials 20 (1999) 809-81, doi:10.1016/S0142-9612(98)00234-8.

99. Dj. Janackovic, R. Cirjakovic, Lj. Kostic-Gvozdenovic, V. Jokanovic, D. Uskokovic, S. Milonjic, “Mullite Powders Synthesis by Colloidal and Urea Assisted Sol-Gel Processes”, Ceram. Trans. 81 (1998) 87-92

98. Z.V.Saponjic, Z.Rakocevic, N.M.Dimitrijevic, J.M.Nedeljkovic, V.Jokanovic, D.P.Uskokovic, “Tailor Made Synthesis of Q-TiO2 Powder by Using Quantum Dots as Building Blocks”, Nanostruct. Mater. 10 (1998) 341-348

97. Dj.Janackovic, V.Jokanovic, Lj.Kostic-Gvozdenovic, D.Uskokovic, “Synthesis of Mullite Nanostructured Spherical Powder by the Ultrasonic Spray Pyrolysis”, Nanostruct. Mater. 10 (1998) 333-339

96. Z.Brankovic, D.Poleti, Lj.Karanovic, D.Uskokovic, “Influence of Spinel Phase Composition on Zno Varistors Properties”, Mat. Sci. Forum 282-283 (1998) 225-232

95. N.Ignjatovic, Z.Brankovic, M.Dramicanin, J.Nedeljkovic, D..Uskokovic, “TiO2 and ZnO Thin Films Prepared by Dip-Coating Method”, Mat. Sci. Forum 282-283 (1998) 147-152

94. V.Jokanovic, Dj. Janackovic, R.Curcic, P. Zivanovic, D.P.Uskokovic, “Synthesis of Cordierite Powder Performed Under the Conditions of Periodic Ultrasonic Fields Activity”, Mat. Sci. Forum 282-283 (1998) 65-70

93. J.M.Nedeljkovic, N.M.Dimitrijevic, M.I.Comor, Z.V,Saponjic, D.P.Uskokovic, “Nanocomposite Materials Prepared by Using Quantum Dots as Building Blocks”, Mat. Sci. Forum 282-283 (1998) 19-26

92. V.Jokanovic, Dj. Janackovic, D.Uskokovic, “Size Distribution of Ultrafine Spherical Ceramic Powders Obtained by Ultrasonic Spray Pyrolysis”, Key Engineering Materials 132-136 (1997) 213-216

91. Dj.Janackovic, V.Jokanovic, Lj.Kostic-Gvozdenovic, R.Cirjakovic, I.Petrovic-Prelevic, D.Uskokovic, “Synthesis of Spinel Powders by the Spray Pyrolysis Method”, Key Engineering Materials 132-136 (1997) 197-200

90. S.R.Stopic, I.B.Ilic, J.M.Nedeljkovic, Z.Lj.Rakocevic, M.V.Susic, D.P.Uskokovic, “Influence of Hydrogen Spillover Effect on the Properties of Ni Particles Prepared by Ultrasonic Spray Pyrolysis”, in SPILLOVER AND MIGRATION OF SURFACE SPECIES ON CATALYSTS, STUDIES IN SURFACE SCIENCE AND CATALYSIS, Vol. 112, Ed., Can Li, Qin Xin, Elsevier Science B.V., 1997, 103-110.

89. J.M.Nedeljkovic, Z.V.Saponjic, Z.Rakocevic, V.Jokanovic, D.P.Uskokovic, “Ultrasonic Spray Pyrolysis of TiO2 Nanoparticles”, Nanostruct. Mater. 9 (1997) 125-128, doi:10.1016/S0965-9773(97)00034-2.

88. S.Stopic, I.Ilic, D.Uskokovic, ”Effect of Pd, Cu and Ni Additions on the Kinetics of NiCl2 Reduction by Hydrogen”, Metall. & Mater. Trans. 28B (1997) 1241-1248.

87. M.Susic, S.Stopic, I.Ilic, D.Uskokovic, ”Kinetics of Hydrogen Absorption by Nickel Powder with added Palladium, Copper and Nickel from Nickel-Chloride Reduction by Hydrogen”, Int. J.Hydrogen Energy, 22:7 (1997) 661-667.

86. Dj.Janackovic, V.Jokanovic, Lj.Kostic-Gvozdenovic, S.Zec, D.Uskokovic, "Synthesis and Formation Mechanism of Submicrometer Spherical Cordierite Powders by Ultrasonic Spray Pyrolysis", J.Mat.Sci. 32 (1997) 163-168.

85. P.Zivanovic, R.Curcic, V.Jokanovic, D.Uskokovic, "Self-Propagating Combustion Synthesis in CuO-Ti and CuO-Zr Systems Initiated by Mechanical Activation", Int. J. Self - Propagating High - Temp. Synt. 5 (1996) 265-276.

84. Dj.Janackovic, V.Jokanovic, Lj.Kostic-Gvozdenovic, D.P.Uskokovic, “Formation Mechanism, Morphology and Synthesis of a-Al2O3, Mullite and Cordierite Particles Obtained by the Ultrasonic Spray Pyrolysis”, Mat. Sci. Forum 214 (1996) 215-222

83. D.P.Uskokovic, “Synthesis of Advance Materials by Powder Processing”, Mat. Sci. Forum, 214 (1996) 189-196

82. Dj.Janackovic, V.Jokanovic, Lj.Kostic-Gvozdenovic, Lj.Zivkovic, D.Uskokovic, "Synthesis, Morphology and Formation Mechanism of Mullite Particles Produced by Ultrasonic Spray Pyrolysis", J.Mater.Res., 11: 7 (1996) 1706-1716

81. V.Jokanovic, Dj.Janackovic, A.Spasic, D.Uskokovic, "Synthesis and formation mechanism of ultrafine spherical Al2O3 powders by ultrasonic spray pyrolysis", Mater. T., JIM 37 (1996) 627-635

80. Lj.Cerovic, S.Milonjic, Lj.Zivkovic, D.Uskokovic, "Synthesis of Spherical b-Silicon Carbide Particles by Ultrasonic Spray Pyrolysis", J.Am.Ceram.Soc. 79 (1996) 2215-17

79. S.Stopic, I.Ilic, D.Uskokovic, "Preparation of Ultrafine Nickel Powders by Ultrasonic Spray Pyrolysis", Int. J.Powder Metall. 32:1 (1996) 59-65.

78. O.Milosevic, M.Mirkovic, D.Uskokovic, "Characteristics and Formation Mechanism of BaTiO3 Powders Prepared by Twin Fluid and Ultrasonic Spray Pyrolysis Methods", J.Am..Ceram.Soc. 79 (1996) 1720-22, doi:10.1111/j.1151-2916.1996.tb08794.x.

77. O.Milosevic, M.Mirkovic, D.Uskokovic, "Synthesis of Single and Complex Metal Oxides for Electronic Materials by Aerosol Spray Pyrolysis”, in SINTERING AND MATERIALS, Proceedings of the Sixth International Symposium on the Science and Technology of Sintering, International Academic Publishers, Ed. Li Nan, Haikon, China, 1995, 328-333.

76. S.Stopic, I.Ilic, D.Uskokovic, "Structural and Morphological Transformations during NiO and Ni Particles Generation from Chloride Precursor by Ultrasonic Spray Pyrolysis", Mater. Let. 24 (1995) 369-374

75. Dj.Janackovic, V.Jokanovic, Lj.Zivkovic, Lj.Kostic-Gvozdenovic, D.Uskokovic, "Preparation of Al2O3, Mullite and Cordierite Powder by the Ultrasonic Spray Pyrolysis and their Crystalization", Eight Cimtec WORLD CERAMICS CONGRESS, Florence, June 29- July 4, 1994 Conference Proceedings pp.1229-1236

74. M.Vukcevic, S.Glisic, P.Zivanovic, D.Uskokovic, "Shock Compaction of AlMgSi0.5 Spheres", J.Mat.Sci. 30 (1995) 2950-2955

73. D.Uskokovic, "Shock Compaction of Aluminium Alloys", Met.Powd.Rep. 49:10 (1994) 18-22

72. S.Stopic, I.Ilic, D.Uskokovic, "Preparation and Formation Mechanism of Submicrometer Spherical NiO Particles from Water Solution of NiCl2 by Ultrasonic Spray Pyrolysis", J.Sci. Sintering 26 (1994)145-156.

71. D.Uskokovic, "Powder Processing in the Institute of Technical Sciences", Int. J.Powder. Metall. 30: 4 (1994) 375-384

70. O.Milosevic, B.Jordovic, D.Uskokovic, "Preparation of Fine Spherical ZnO Powders by an Ultrasonic Spray Pyrolysis Method", Mater. Let. 19:3-4 (1994) 165-170, doi:10.1016/0167-577X(94)90063-9.

69. D.Uskokovic, "Serbian Institute targets powder preparation", Metal Powder Report, 49:3 (1994) 12-15.

68. Z.Brankovic, O.Milosevic, Lj.Karanovic, D.Poleti, D.Uskokovic, “Nanostructured ZnO based Varistor Constituents Prepared by Mechanical Attrition", NanoStructured Materials, 2:3-4 (1994) 149-158.

67. M.Vukcevic, S.Glisic, P.Zivanovic, D.Uskokovic, "Hot Shock Compaction of Al-Li-X Spheres", Proc. '93 PM, 1993 Powder Metallurgy World Congress, Eds. Y.Bando, K.Kosuge, Publ. Jap. Soc. Powd. & Powd. Metal., Kyoto, 1993, Part 1, 339-342.

66. O.Milosevic, M.Tomasevic-Canovic, Lj.Karanovic, D.Uskokovic, "Synthesis of ZnO Based Varistor Precursor Powders by the Reaction Spray Process", J.Mat.Sci. 28 (1993) 5211-5217

65. Z.Milosavljevic, O.Milosevic, D.Uskokovic, D.Vasovic, D.Poleti and Lj.Karanovic, "A Novel Approach to Control of ZnO-based Varistor Microstructures at the Nanometre Level", Mat. Sci. Eng. A168 (1993) 253-256.

64. O.Milosevic, D.Uskokovic, "Synthesis of BaTiO3 and ZnO Varistor Precursor Powders by means of the Reaction Spray Pyrolysis", Mat.Sci. Eng. A168 (1993) 249-252, doi:10.1016/0921-5093(93)90736-X.

63. M.Vukcevic, S.Glisic, D.Uskokovic, "Dynamic Compaction of Al-Li-X Powders Obtained by Rotating Electrode Process", Mat. Sci. Eng. A168 (1993) 5-10.

62. B.Mihelic, M.Dakic, R.Djekic, D.Uskokovic, "Processing of Compact Materials by use of Self-Propagating High Temperature Synthesis and Pseudo Hot Isostatic Pressing", Mater. Lett.13 (1992) 391-395.

61. D.P.Uskokovic, H.E.Exner "The Kinetics of Contact Formation during Sintering by Diffusion Mechanism", in SINTERING-KEY PAPERS, Eds. S.Somiya and Y.Morioshi, Elsevier, Amsterdam, 1990, 804.

60. M.V.Vlasova, N.G.Kakazey, O.Milosevic, D.Poleti, D.Vasovic, D.Uskokovic, "Electronic Paramagnetic Resonance (EPR) Study of the Structure of ZnO Varistors Prepared by Various Chemical Methods", J.Mat.Sci. 25 (1990) 4324-4330.

59. M.V.Susic, B.Mihelic, D.P.Uskokovic, "Crystallization Kinetics and Thermal Stability of Shock-Compacted Amorphous Ni78P22", Mater.Lett. 9 (1990) 215-218.

58. B. Mihelic, B. Serbedzija, V. Petrovic, M.V. Susic, D.P. Uskokovic, "Dynamic Compaction of Amorphous Ni78P22", in SCIENCE OF SINTERING: New Direction for Materials Processing and Microstructural Control, (D.P.Uskokovic, H.Palmour III, R.M.Spriggs, Eds.), Plenum Press, New-York and London, 1990, 285-293.

57. O.Milosevic, D.Vasovic, D.Poleti, Lj.Karanovic, V.Petrovic, D.Uskokovic, "Progress in Preparation of ZnO based Varistor Ceramics", in SCIENCE OF SINTERING: New Direction for Materials Processing and Microstructural Control, (D.P.Uskokovic, H.Palmour III, R.M.Spriggs, Eds.), Plenum Press, New-York and London, 1990, 117-126.

56. M.Zdujic, D.Uskokovic, "Poluchenie Raspillenih Poroshkov Metallov i Splavov Metodom Vraschayuschegosya Elementa", Sov. Powder Metall., 9 (1990) 11-22.

55. O.Milosevic, D.Vasovic, D.Poleti, Lj.Karanovic, V.Petrovic, D.Uskokovic, "Development of Crystal Phases and Non-linear Properties in Chemically Prepared Varistor Ceramics", Euro-Ceramics 2 (1989) 2383-2388.

54. O.Milosevic, D.Vasovic, D.Poleti, Lj.Karanovic, V.Petrovic, D.Uskokovic, "Microstructural and Electrical Properties of ZnO Varistors Prepared by Coprecipitation and Evaporation of Suspensions and Solutions", Ceram. Trans. 3 (1989) 395-401.

53. M.V.Susic, M.Zdujic, Lj.Karanovic, D.Uskokovic, "Crystallization Kinetics of Partially Crystallized Ti-5Al Powders Obtained by Rotating Electrode Process", Z.Metallkd. 80 (1989) 497-501.

52. M.V.Susic, D.P.Uskokovic, "Crystallization Kinetics of Amorphous Ni78P22 Powders and Hydrogen Adsorption on Both Amorphous and Crystalline Alloy Powders", J.Mat.Sci. 23 (1988) 4076-4080.

51. M.Zdujic, D.Uskokovic, "Rapidly Solidified Crystalline and Amorphous Powders - Problems and Perspectives", in SINTERING '87, (S.Somiya et al. Eds.), Elsevier, Amsterdam, 1988, 176-181.

50. P.Kostic, O.Milosevic, M.M.Ristic, D.P.Uskokovic, "Potential Barrier Degradation at the Grain Boundary of ZnO-Based Nonlinear Resistors", Physica B150 (1988) 175-178.

49. O.Milosevic, P.Kostic, D.Uskokovic, "Structure Recovery of Hot-Isostatically Pressed Varistor Ceramics Based on ZnO", Proc. of International Conference on Hot Isostatic Pressing, (Tore Garvare Ed.), Lulea, Sweden, 1988, 405-410.

48. M.Zdujic, V.Petrovic, Lj.Karanovic, D.Uskokovic, "Production of Metal Powders by Rotating Electrode Process", in CERAMICS AND METALS, (D. Kolar, M. Kosec, J. Krawczynski, Eds.) Kernforschungsanlage Julich GmbH, 1988, 363-370.

47. O.Milosevic, P.Kostic, Lj.Karanovic, V.Petrovic, D.Uskokovic, "Microstructure and Phase Development in Multicomponent ZnO based Varistor Ceramics", in CERAMICS AND METALS, (D. Kolar, M. Kosec, J. Krawczynski Eds), Kernforschungsanlage Julich GmbH, 1988, 323-330.

46. P.Kostic, O.Milosevic, Z.Zdravkovic, D.Uskokovic, "Hot Isostatic Pressing of Sintered ZnO Varistor Ceramics", in HIGH TECH. CERAMICS, (P.Vincenzini Ed.), Elsevier, Amsterdam, 1987, 1819-1824.

45. P.Kostic, O.Milosevic, D.Uskokovic, "The Influence of Sintering Parameters and Subsequent Thermal Treatment on U-I Characteristics and Degradation of ZnO Varistors", in "SINTERING '85", (G.C.Kuczynski, D.P.Uskokovic, H.Palmour III, M.M.Ristic, Eds.) Plenum Press, New York and London, 1987, 301-308.

44. M.Zdujic, V.Petrovic, D.Uskokovic, "Preparation of Molybdenum Powders by Rotating Electrode Process", in "SINTERING '85", (G.C.Kuczynski, D.P.Uskokovic, H.Palmour III, M.M.Ristic, Eds.) Plenum Press, New York and London, 1987, 101-108.

43. M.Zdujic, D.Uskokovic, "Theoretical Analyses of Metal Particle Cooling in the Rotating Electrode Process", in "SINTERING '85", (G.C.Kuczynski, D.P.Uskokovic, H.Palmour III, M.M.Ristic, Eds.) Plenum Press, New York and London, 1987, 88-99.

42. M.Zdujic, M.Sokic, V.Petrovic, D.Uskokovic, "The Study of Properties and Cooling Rates of Steel Powder Obtained by Rotating Electrode Process", Powder Metall. Int 18 (1986) 275-277 and 325-329.

41. V.Petrovic, S.M.Radic, D.Uskokovic, M.M.Ristic, "A Contribution to Investigation of Grain Growth during Oxides Sintering", J. Sci. Sint., 17 (1985) 81-85.

40. M.V.Vlasova, N.G.Kakazey, P.Kostic O.Milosevic, D.P.Uskokovic, "EPR Study of the Influence of Defect Structure on Electrical Properties of ZnO Varistors", J. Mater. Sci., 20 (1985) 1660-1670.

39. L.F.Stasjuk, I.P.Kusthalova, I.Krstanovic, S.M.Radic, D.P.Uskokovic, M.M.Ristic, "Reakcionnoe Spekaniye v Sisteme Almaz-Karbid Titana-Hrom pod Visokim Davleniem", Bull. Soc. Chim., 49 (1984) 563-569.

38. I.P.Kusthalova, L.F.Stasjuk, D.P.Uskokovic, S.M.Radic, M.M.Ristic, "Uprochneniye Metallicheskoi Matrici Karbidom Titana, Polluchenogo Reakciei v Sisteme Almaz-Titan-Nikel", Bull. Soc. Chim., 49 (1984) 556-561.

37. P.Kostic, O.Milosevic, D.Uskokovic, "The Influence of Doping on Electrical Properties of ZnO Varistors", J. Sci. Sint., 16 (1984) 127-136.

36. V.Petrovic, S.M.Radic, D.Uskokovic, M.M.Ristic, “Behaviour of Sintered Al2O3 in Vacuum at High Temperatures”, J. Sci. Sint., 16 Spec. Issue (1984) 119-121.

35. M.M.Ristic, D.P.Uskokovic, V.Petrovic, P.Kostic, O.Milosevic, "The Influence of Bi2O3 Content on the Microstructure and Electrical Properties of Varistor Ceramics based on ZnO", Bull. Acad. Serbe des Science et des Arts 85, No. 21 (1984) 11-20

34. D.P.Uskokovic, P.Kostic, O.Milosevic, V.Petrovic, M.M.Ristic, "The Study of Electrical Properties and Microstructure of Non-Ohmic ZnO Ceramics", in SINTERED METAL-CERAMIC COMPOSITES, (G. S. Upadhyaya Ed.), Elsevier, Amsterdam, (1984) 513.

33. V.V.Skorohod V.V.Panichkina, D.P.Uskokovic, M.Pavicevic, M.M.Ristic, "Redistribution of Nickel during Activated Sintering of Tungsten with Nickel Additive", J. Sci. Sint., 16 (1984) 7-12.

32. M.V.Vlasova, S.I.Gorbachuk, N.G.Kakazey, V.M.Meljnik, M.D.Smolin, D.P.Uskokovic, S.M.Radic, M.M.Ristic, "Vilynie Visokih Davlenii na Elektronii Paramagnetnii Rezonans Iona Mn2+ v Litografskom Kamne", Bull. Soc. Chim., 48 (1983) 143-152.

31. I.P.Kushtalova, D.P.Uskokovic, M.M.Ristic, "Rolj Prochnosti i Plastichnosti Tugoplavkih Soedinenii v Sozdanii Abrazivov i Tverdih Splavov", Bull. Soc. Chim., 48 (1983), 63-70.

30. O.Milosevic, P.Kostic, V.Petrovic, D.PUskokovic, "The Study of the Grain Growth and Electrical Properties of ZnO Varistor Ceramics", J. Sci. Sint., 15 (1983) 121-130.

29. D.Uskokovic, B.Novakovic, V.Petrovic, M.M.Ristic, "The Influence of Particle Size on Intermediate and Final Stages of Molybdenum Sintering", in SINTERING-THEORY AND PRACTICE (D. Kolar, S. Pejovnik and M.M. Ristic Eds), Elsevier, (1982) 62-70.

28. V.I.Trefilov Yu.V.Milman, I.V.Gridneva, D.P.Uskokovic, M.M.Ristic, "Zavisimost Mechanicheskih Svoistv Hrupkih Kovalentnih Kristallov of Strukturnih Faktorov", Bull. Soc. Shim., 47 (1982) 361-367

27. D.P.Uskokovic, B.Yakowlew, M.M.Ristic, "The Role of Science of Sintering in the Development of New Materials", in SYNTHETIC MATERIALS FOR ELECTRONICS, (B. Yakowlew, A. Szymanski, W. Wlosinski, Eds.), Elsevier Amsterdam, (1981) 21-43.

26. D.Uskokovic, V.Petrovic. M.M.Ristic, "Interdependence of the Porosity, Grain Size and Pore Size during Intermediate Stage of Sintering", in SINTERING PROCESSES (G. C. Kuczynski Ed.), Mat. Sci. Res., Vol. 13, Plenum Press New York & London, (1980) 471-477

25. M.M.Ristic, D.P.Uskokovic, M.V.Vlasova, N.G.Kakazey, B.M.Kipnis, I.A.Hint, "Issledovanie Metodom EPR Processa Defektoobrazovaniya v Kristallah MgO, Podvergnutih Dezintegratornomu Razrusheniju", GLAS SANU, 122, No. 17 (1980) 35-41.

24. M.V.Vlasova, N.G.Kakazey, T.Ya.Kosolapova, G.N.Makarenko, E.V.Marek, D.P.Uskokovic, M.M.Ristic, "The Structure of Paramagnetic Centres and the Formation of Defects in the B-C-Ti and B-C-Cr Systems", J. Mat. Sci., 15 (1980) 1041-1048.

23. D.Uskokovic, Z.Nikolic, M.M.Ristic, "The Analysis of Metals Sintering from the Standpoint of Sintering Maps", J. Sci. Sint., 11, Special Issue, (1979) 59-84

22. D.P.Uskokovic, H.E.Exner, "The Kinetics of Contact Formation During Sintering by Diffusion Mechanism", J. Sci. Sint., 9 (1977) 265-303.

21. G.V.Samsonov, M.V.Vlasova, N.G.Kakazey, B.A.Grigorjev, D.P.Uskokovic, M.M.Ristic, "Study of the Elementary Mechanisms during Sintering of MgO with Mn2O3 and NiO Additives", J. Phys. Colloque C7, Suppl. No. 12 (1977) 415-422.

20. D.Uskokovic, J.Petkovic, M.M.Ristic, "Kinetics and Mechanism of the Initial Stage of Sodium Fluoride Sintering under Non-Isothermal Conditions", in "Sintering and Catalysis", (G.C. Kuczynski Ed), Mat. Sci. Res., Vol. 10, Plenum Press, New-York and London, (1976) 315-324.

19. D.Uskokovic, J.Petkovic, M.M.Ristic, "Study of the Kinetic and Mechanism of Sintering under Constant Heating Rates", J. Sci. Sint., 8 (1976) 129-148.

18. B.A.Grigorjev, V.Petrovic, D.Uskokovic, M.M.Ristic, "The Influence of Mangan Ion Valency State on Formation of Microstructure Constituens during Sintering of Magnesium Oxide", Metall., 9 (1976) 293-298.

17. D.Delic, D.Uskokovic, M.M.Ristic, "Sintering of Carbonil Iron Powder in the a-Region", Int. J. Powder Metall., 11 (1975) 189-193.

16. D.P.Uskokovic, M.M.Ristic, "Mezhduzavisimost Razmer Zerna, Razmer Por i Plotnosti v Processe Spekaniya", Sov. Powder Metall. No. 8 (1975) 102-103.

15. N.G.Kakazey, M.M.Ristic, D.P.Uskokovic, V.A.Miheev, "O Sostoyanie Ionov Nikelja v Sisteme MgO-NiO po Dannim EPR", Zh. Prikl. Spektr., 21 (1974) 1031-1035.

14. D.Uskokovic, V.Mikijelj, S.Radic, M.M.Ristic, "Contribution to Some Phenomenological Relations in Crystalline Powder Compact Sintering", Proc. of IV Intern. Powder Metal. Conf. Toronto, Canada, 1973, (H. H. Hausner and W. E. Smith Eds.), Publ. Metal. Powd. Ind. Federation and Amer. Powd. Metal. Inst. (1974) 369-376.

13. V.A.Miheev, N.G.Kakazey, L.A.Sorin, G.V.Samsonov, D.P.Uskokovic, M.M.Ristic, "The State of Additive Mn Ions in MgO-MnO2 Systems", J. Sci. Sint., 6 (1974) 155-162.

12. V.V.Skohorod, A.F.Hrienko, D.P.Uskokovic, O.Nesic, "Vlyanie Vodoroda na Dislokacionnuju Strukturu Nikelja", Sov. Powder Metall. No. 2 (1974) 76-80.

11. D.Uskokovic, M.M.Ristic, "Sintering Kinetics of a-Nb2O5 in Non-Isothermal Conditions", in "Sintering and Related Phenomena", (G. C. Kuczynski Ed.), Mat. Sci. Res., Vol. 6 Plenum Press New York & London, (1973) 283-292.

10. D.P.Uskokovic, Lj.Djuricic, B.Zivanovic, M.M.Ristic, "The Sintering of Nostochiometric UO2 under Non-Isothermal Conditions", J. Mater. Sci., 8 (1973) 539-546.

9. N.G.Kakazey, V.A.Miheev, L.A.Sorin, G.V.Samsonov, D.P.Uskokovic, M.Zivkovic, M.M.Ristic, "The Kinetics of Sintering of Sodium Fluoride and the Influence, of Paramagnetic Cetres in this Process", J. Phys. Sint., 5 (1973) 115-132.

8. T.Janackovic, V.Petrovic, D.Uskokovic, M.M. Ristic, "Grain Growth during Sintering of Nb2O5", Metall., 6 (1973) 171-176.

7. Lj.Nikolic, D.Uskokovic, M.M. Ristic, "Issledovanie Kinetiki i Mehanizma Spekaniya Kristallov Florida Natriya", Sov. Powder Metall. No. 12 (1972) 90-97.

6. J.Lazovic, Lj.Nikolic, S.Radic, D.Uskokovic, M.M.Ristic, "The Pressure Influence on the Kinetics and Mechanism of Sintering NaF", Proc. of the First Intern. Conf. on the Compaction and Consolidation of Particulate Materials, Brighton, England, (1972) 69-73.

5. D.Delic, T.Janackovic, D.P.Uskokovic, M.M.Ristic, "Macrocinetics of the Sintering of a-Nb2O5", J. of Japan Soc. Powd. and Powd. Metal. 19 (1972) 291-301.

4. V.V.Skorohod, A.F.Hrienko, V.A.Smirnov, D.P.Uskokovic, "On Sintering Mechanism of Active Nickel Powders", J. Phys. Sint., 4 (1972) 47-61.

3. M.Zivkovic, D.Uskokovic, L.Djordjevic, M.M.Ristic, "K Phenologicheskomu Izucheniju Processa Spekaniya", Sov.Powder Metall. No. 1(1972) 103-107.

2. J.Lazovic, Lj.Nikolic, D.Uskokovic, "Sintering Kinetics of NaF in Non-Isothermal conditions", J. Phys. Sint., 3 (1971) 111-117.

1. D.Uskokovic, B.Zivanovic, M.Zivkovic, M.M.Ristic, "Study of the Sintering of Molibdenum Powder", High Temp. High Pres., 3 (1971) 461-466.

 

 
   
Copyright © 2007 Institut tehničkih nauka Srpske akademije nauka i umetnosti