Rođen je 21. januara 1967.godine u Novom Sadu. Završio je Fakultet za fizičku hemiju u Beogradu 1999. godine. Magistrirao je 2005. godine, na Tehničkom fakultetu u Čačku, na temu «Uticaj mehaničke aktivacije na sintezu cink-metatitanata». Doktorsku tezu "Sinterovanje i svojstva sinterovanog ZnTiO3" odbranio je 2011. godine na Fakultetu za fizičku hemiju u Beogradu. Godine 2018. izabran je u zvanje višeg naučnog saradnika.

Oblasti interesovanja: mehanička aktivacija, sinterovanje, dilatometrija .

Zaposlen je u Institutu od 2001.godine.

Najznačajnije publikacije

1. L. Mancic, O. Milosevic, N. Labus and M.M. Ristic, “High Tc superconducting powders synthesis from aerosol”, Journal of European Ceramic Society, 21 (2001) 2765-2769 (doi:10.1016/S0955-2219(01)00360-0)
2. T. Srećković, N. Obradović , N. Labus, Lj. Živković, "Enhancing synthesis and sintering of zinc titanate using mechanical activation" , Mat. Sci. Forum , 453-454 (2004), 435-440.
3. M.V. Nikolić, N. Labus, "A phenomenological analysis of sintering kinetics of alumina”, Mat. Sci. Forum , 453-454 (2004) 441-446
4. M. V. Nikolić , N. Labus, M.M. Ristić, “A Phenomenological Analysis of Sintering Kinetics from Viewpint of Activated Volume” , Science of Sintering, Vol. 37, No. 1 (2005), 19-25.
5. N. Obradovic, N. Labus , T. Sreckovic, M.M. Ristic, "Dilatometer investigations of reactive sintering of zinc titanate ceramics", Materials Science Forum , Vol. 494 (2005) 411-416.
6. M.V. Nikolić, V.P. Pavlović, V.B. Pavlović, N. Labus , B. Stojanović, "Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics", Materials Science Forum , Vol. 494 (2005) 417-422.
7. N. Obradović, N. Labus, T. Srećković, D. Minić, M.M. Ristić, "Synthesis and characterization of zinc titanate nano-crystal powders obtained by mechanical activation", Science of Sintering 37 (2005) 123-129.
8. N. Labus , N. Obradović, T. Srećković, V. Mitić , M.M. Ristić, "Influence of mechanical activation on synthesis of zinc metatitanate", Science of Sintering 37, (2005), 115-122.
9. V.P. Pavlović, M.V. Nikolić, V.B. Pavlović, N. Labus, Lj. Živković, B.D. Stojanović, "Correlation between Densification Rate and Microstructure Evolution of Mechanically Activated BaTiO 3", Ferroelectrics 319 (2005) 1-11 (DOI:10.1080/00150190590965451)
10. N. Obradović, N. Labus, T. Srećković, M. M. Ristić, “The influence of tribophysical activation on Zn2TiO4 synthesis”, Mat. Sci. Forum, 518 (2006), 131-136.
11. V.V. Petrović, A.Maričić, N.Labus, M.M.Ristić, "Influence of Mechananical activation on synthesis on the properties of the  MgO-TiO2 System", Science of Sintering, Vol.39 (2007) 59-65 (DOI: 10.2298/SOS0701059P)
12. N. Obradović, N. Labus, T. Srećković, S. Stevanović, “Reaction sintering of 2ZnO-TiO2”, Sci. Sint., 39 (2007) 127-132 (doi:10.2298/SOS0702127O).
13. P.M. Nikolić, K.M. Paraskevopoulos, T.T. Zorba, E. Pavlidou, N. Kantiranis, S.S. Vujović, O.A. Aleksić, M.V. Nikolić, T. Ivetić, S. Savić, N. Labus, V. Blagojević, "Far Infrared Properties of Sintered PbTe Doped with Boron", Science of Sintering, Vol. 39, No. 3 (2007) 223-228.
14. S. Stevanovic, V. Zeljkovic, N. Obradovic, N. Labus, "Investigation of sintering kinetics of ZnO by observing reduction of the specific surface area", Science of Sintering, Vol. 39 (2007) 259-265 (doi: 10.2298/SOS0703259S).
15. N. Labus, S. Stevanovic, M.M. Ristic, "Sintering of mechanically activated Zno-TiO2 powders", Powder Metallurgy and Metal Ceramics 47 (2008) 40-46.
16. P.M. Nikolic, S.S. Vujatovic, D. Golic, N.J. Labus, K.M. Paraskevopoulos, K.T. Zorbas, M.V. Nikolic, A. Bojicic, V. Blagojevic, W. Koenig, "Far infrared spectroscopy of Pb0.85Sn0.15Te alloy doped with Ni", International Journal of Materials Research 99 (2008) 1393-1396 (DOI: 10.3139/146.101772).
17. P.M. Nikolić, K.M. Paraskevopoulos, S.R. Djukić, S.S, Vujatović, N.J. Labus, T.T. Zorba, M. Jović, M.V. Nikolić, A. Bojčić, V. Blagojević, B, Stamenović, W. Koenig, W. "Far infrared study of impurity local modes in palladium-doped PbTe and PbSnTe", Journal of Alloys and Compounds 475 (2009) 930-934 (doi: 10.1016/j.jallcom.2008.08.069).
18. M.V. Nikolic, N. Labus, M.M. Ristic, Densification rate and phase structure changes during sintering of zinc titanate ceramics, Ceramics International 35 (2009) 3217-3220 (doi:10.1016/j.ceramint.2009.05.028).
19. P. M. Nikolić, K. M. Paraskevopoulos, M. V. Nikolić, S. S. Vujatović, E. Pavlidou, T. T. Zorba, T. Ivetić, B. Stamenović, N. Labus, M. Jović, M. M. Ristić, Far infrared properties of sintered Pb0.9Sn0.1Te doped with Palladium, Powder Metallurgy and Metal Ceramics 48 (2009) 353-357 (doi:10.1007/s11106-009-9122-y).
20. B. Matovic, D. Nikolic, N. Labus, S. Ilic, V. Maksimovic, J. Lukovic, D. Bucevac, "Preparation and properties of porous, biomorphic, ceria ceramics for immobilization of Sr isotopes", Ceramics International, 39, 8 (2013) 9645-96492013, http://dx.doi.org/10.1016/j.ceramint.2013.05.086.
21. N. Labus, J. Krstić, S. Marković, D. Vasiljević-Radović, M.V. Nikolić, V. Pavlović, "ZnTiO3 ceramic nanopowder microstructure changes during compaction", Science of Sintering 45, 2 (2013) 209-221, http://dx.doi.org/10.2298/SOS1302209L
22. Z. Z. Djuric, O. S. Aleksic, M. V. Nikolic, N. Labus, M. Radovanovic, M. D. Lukovic, "Structural and electrical properties of sintered Fe2O3/TiO2 nanopowder mixtures", Ceramics International 40, 9 (2014) 15131–15141, http://dx.doi.org/10.1016/j.ceramint.2014.06.126.
23. N. Labus, S. Mentus, Z. Z. Đurić, M. V. Nikolić, "Influence of nitrogen and air atmosphere during thermal treatment on micro and nano sized powders and sintered TiO2 specimens", Science of Sintering, 46, 3 (2014) 365-375, http://dx.doi.org/10.2298/SOS1403365L.
24. N. Labus, S. Mentus, S. Rakic, Z. Z. Djuric, J. Vujancevic, M. V. Nikolic, "Reheating of zinc-titanate sintered specimens", Science of Sintering 47, 1 (2015) 71–81, http://dx.doi.org/10.2298/SOS1501071L.
25. M. Milutinov, M. V. Nikolic, M. D. Lukovic, N. Blaz, N. Labus, L. D. Zivanov, O. S. Aleksic 2016, "Influence of starting powder milling on structural properties, complex impedance, electrical conductivity and permeability of Mn–Zn ferrite," Journal of Materials Science: Materials in Electronics 27, 11 (2016) 11856–11865, http://dx.doi.org/10.1007/s10854-016-5328-1
26. O. S. Aleksić, Z. Z. Vasiljević, M. Vujković, M. Nikolić, N. Labus, M. D. Luković, M. V. Nikolić, " Structural and electronic properties of screen-printed Fe2O3/TiO2 thick films and their photoelectrochemical behavior", Journal of Materials Science, 2017, https://doi.org/10.1007/s10853-017-0830-2.
27. E. Požega, P. Nikolić, S. Bernik, L. Gomidželović, N. Labus, M. Radovanović, S. Marjanović, "Synthesis and investigation of BiSbTeSe single crystal doped with Zr produced using Bridgman method", Revista de Metalurgia 53, 3 (2017) http://revistademetalurgia.revistas.csic.es/index.php/revistademetalurgia/article/view/1417/1645.
28. M. M. Milutinov, M. V. Nikolić, S. G. Luković, N. Blaž, N. Labus, O. S. Aleksić, L. D. Živanov, "Influence of starting powder milling on magnetic properties of Mn-Zn ferrite", Processing and Application of Ceramics 11 (2017) 160–169, https://doi.org/10.2298/PAC1702160M
29. N. Labus, Z. Ž. Vasiljević, D. Vasiljević-Radović, S. Rakić, M. V. Nikolić, "Two step sintering of ZnTiO3 nanopowder", Science of Sintering 49, 1 (2017) 51–60, https://doi.org/10.2298/SOS1701051L.
30. N. Labus, Z. Vasiljevic, O. Aleksic, M. Lukovic, S. Markovic, V. Pavlovic, S. Mentus, M. V. Nikolic, "Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment", Science of Sintering 49, 4 (2017) 455–467, https://doi.org/10.2298/SOS1704455L.
31. S. D. Matijašević, S. R. Grujić, V. S. Topalović, J. D. Nikolić, S. V. Smiljanić, N. J. Labus, V. V. Savić, 2018, "Non-isothermal crystallization of lithium germanophosphate glass studied by different kinetic methods", Science of Sintering 50 (2018) 193–203, https://doi.org/10.2298/SOS1802193M.
32. M. V. Nikolic, M. D. Lukovic, Z. Z. Vasiljevic, N. J. Labus, O. S. Aleksic, Humidity sensing potential of Fe2TiO5 - pseudobrookite. Journal of Materials Science: Materials in Electronics, 277 (2018) 654-664, https://doi.org/10.1007/s10854-018-8951-1.
33. D. A. Kosanović, V. A. Blagojević, N. J. Labus, N. B. Tadić, V. B. Pavlović, M. M. Ristić, "Effect of chemical composition on microstructural properties and sintering kinetics of (Ba,Sr)TiO3 powders", Science of Sintering 50 (2018) 29–38, https://doi.org/10.2298/SOS1801029K.
34. M. V. Nikolic, M. D. Lukovic, N. J. Labus, "Influence of humidity on complex impedance and dielectric properties of iron manganite (FeMnO3)", Journal of Materials Science: Materials in Electronics 30 (2019) 12399–12405, https://doi.org/10.1007/s10854-019-01598-1.
35. M. V. Nikolic, M. Dojcinovic, Z. Z. Vasiljevic, M. D. Lukovic, N. J. Labus, "Nanocomposite Zn2SnO4/SnO2 Thick films as a Humidity Sensing Material", in: 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). Presented at the 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), IEEE, 2019, pp. 1–3. https://doi.org/10.1109/FLEPS.2019.8792304
36. J. Živojinović, V.P. Pavlović, N. J. Labus, V. A. Blagojević, D. Kosanović, V. B. Pavlović, "Analysis of the initial-stage sintering of mechanically activated SrTiO3", Science of Sintering 51 (2019) 199-208, https://doi.org/10.2298/SOS1902199Z
37. M. V. Nikolic, J. B. Krstic, N. J. Labus,M. D. Lukovic, M.P., Dojcinovic, M. Radovanovic, N. B. Tadic, "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing", Materials Science and Engineering: B, 257 (2020) 114547, https://doi.org/10.1016/j.mseb.2020.114547)
38. D. Kosanović, N. Labus, J. Živojinović, A. Peleš Tadić, V. A. Blagojević, V.B. Effects of Mechanical Activation on the Formation and Sintering Kinetics of Barium Strontium Titanate Ceramics. Science of Sintering 52 (2020) 371–385. https://doi.org/10.2298/SOS2004371K
39. S. Matijašević, V. Topalović, S. Grujić, V. Savić, J. Nikolić, N. Labus, S. Zildžović, "The thermophysical properties of primary phase in lithium germanium phosphate glass", Science of Sintering 53 (2021) 301–310. https://doi.org/10.2298/SOS2103301M
40. M. V. Nikolić, N. Labus, V. P. Pavlović, S. Marković, M. D. Luković, N. B. Tadić, J. Vujančević, B. Vlahović, V. B., Pavlović, "Nanocrystalline Zn2SnO4/SnO2: Crystal structure and humidity influence on complex impedance", Journal of Electroceramics 45 (2021) 135–147. https://doi.org/10.1007/s10832-021-00232-z